<strike id="6a4ch"><sup id="6a4ch"></sup></strike>
    1. <big id="6a4ch"></big>
      <center id="6a4ch"></center>
    2. <strike id="6a4ch"><address id="6a4ch"></address></strike>
      <th id="6a4ch"></th>
      1. <strike id="6a4ch"><sup id="6a4ch"></sup></strike>

          Return home  |  Contact us | 中文版
        您的位置:首頁> > technical cooperation
        technical cooperation


        Contact address: No. 68, Wenzhou Road, building No. six

        HPT-01 series of hydrodesulfurization protectants

        Release time:2017-04-10 17:37:10    source:

        Long-term operation of the hydrogenation unit, will inevitably according to the nature of different raw materials, there are different degrees of pipeline wall corrosion peeling phenomenon, and in the form of iron salt by the reactor filter, plug the catalyst microporous and bed gap, thus Resulting in bed pressure rise and catalyst deactivation. HPT-01 series of hydrodesulfurization protective agent, provided by me a set of diene saturated, iron, scale effect in one of the new hydrogenation catalyst protection proppant. The agent has a large pore volume and specific surface area; clover-shaped appearance, with excellent compression, wear resistance; moderate particle size, can improve the distribution of logistics. Suitable for all hydrogenation reaction devices, according to the need to fill in the main catalyst between the top of the catalyst and the ball between the ball can reduce the coking scale, reduce the bed pressure drop, to extend the hydrogenation cycle and the use of the catalyst Life, reduce the cost of running the purpose. The protective agent has been successfully applied in Zhenhai Refining and Chemical, Jingmen Petrochemical and other hydrogenation devices, and achieved good results. The main properties of the HPT-01 series hydrodesulfurizing agents are shown in the following table:
        The main properties of HPT-01 series hydrodesulfurizing agent
        Project Clover strips Hollow cylinder Seven holes in the ball
        Three hole ball
        HPT-010 HPT-01A HPT-01B HPT-01 HPT-01C
        Exterior White or yellowish green clover or hollow cylindrical or porous ball or microporous spherical particles
        Graininess(d), mm                Φ1.4±0.1 Φ2.0±0.5 Φ3.5±0.5 Outside diameterΦ4.0±0.5 Outside diameterΦ6.0±0.5 Φ18±2 Φ13±2 Φ13±2
        length, mm 3~8 ---- ---- ---- ---- ----
        Packing density,g/cm3        0.65±0.05 0.65±0.05 0.60±0.05 0.60±0.05 0.50±0.05 0.85±0.05 ~1.3 ~1.3
        Crushing strength, N / grain     ≥100 ≥100 ≥300
        Specific surface area, m2 / g            ≥150 ≥100 ≥110 ---- ---- ----
        Hole volume,ml/g ≥0.50 ≥0.30 ≥0.30 ---- ---- --
        model HPT-01G HPT-01H
        Shape Five impellers Five impellers
        Size,mm 5.5~6.5 3.5~4.5
        MoO3,m% 0~11 0~11
        NiO,m% 1~2.5 1~3.5
        Kong Rong,ml/g ≥0.50 ≥0.50
        Table,m2/g ≥200 ≥200
        Heap ratio, g/cm3 0.45±0.05 0.45±0.05